8K DisplayPort 1.4 Fiber Extender Kit (7680x4320@60Hz) over LC Single Mode Simplex up to 300m / 985ft - Transmitter & Receiver with RS232 + Bi-DIR IR Support

8K DisplayPort 1.4 Fiber Extender Kit (7680x4320@60Hz) over LC Single Mode Simplex up to 300m / 985ft - Transmitter & Receiver with RS232 + Bi-DIR IR Support

Advantages

Support resolution up to 8K (7680x4320@60Hz)

Uncompressed and zero latency transmission

Extend DP1.4 signal over single core optical fiber up to 300m

Support IR remote control and RS232

Adopt CWDM (coarse wavelength division multiplexing) optical fiber technology

AUX adopts transparent transmission mode, has good compatibility

Support FEC, solve the compression video output to external display moderate fault tolerance

Support HDR (High Dynamic Range) metadata transmission

Plug-and-play operation for quick setup and immediate use

Overview

DP1.4 fiber extender adopts CWDM optical fiber technology, which multiplexes optical signals of 6 different wavelengths in a single fiber for transmission, and really realizes transmission of an uncompressed DP1.4 video signal in a single fiber.   

Bullet Point

【985Ft DP1.4 signal Extension】The DP1.4 optical fiber converter can extend 8K video and audio signal from a DisplayPort (DP) source device to a DP monitor up to 985ft away via single mode single core optical fiber

【High Compatibility】Support ultra HD video resolutions up to 7680x4320@60 Hz and compatible backwards with lower resolution. Compatible with almost any audio format and overrides such as 32-bit audio channels

【Uncompressed Transmission】DP fiber extender extends 8Kx4K DP signal without delay and losses. Adopt DSC display compression stream technology to support the refresh rate of 240Hz under 4K and 60Hz under 8K

【Support RS232 and Bi-Di IR】RS232 Port for control signal transmission, you can control the RS232 serial device from remote side and support extend IR signal from source to receiver or from transmitter to receiver

【Unique Design】The DisplayPort1.4 fiber extender adopts harden aluminum material and can be used in changeable environment. Plug and play, setup without any software installation. Convenient to operate

Specifications

Standard: Compatible with DP1.4 and HDCP2.2 protocol

Model: LDP14-601s01-T/R

Fiber Connector: LC single mode simplex 

DisplayPort Interface: DP1.4 female

DP Signal Type: TMDS

IR interface: 3.5mm earphone seat

IR Remote Control Frequency: 38kHz (NEC)

RS232 Baud rate: Backward Self-adaptive, Max:115200bps

Resolution: 8k/5k/4k/2k/1080p

Transmission distance: Max 990Ft (300m)

Bandwidth: 32.4Gbps

Power Input: DC 12V

Case Material: Aluminum

Dimension: 5.51*3.35*1.02in (140*85*26mm) 

Item Weight: 0.99lb*2 (450g*2)

Operating Temperature: -10℃ ~ +60℃ (14℉~140℉)

Storage Temperature: -40℃ ~ +85℃ (-40℉~185℉)

Application

DisplayPort1.4 fiber extender is suitable for smart home audio and video management system, HD public display video transfer and point-to-point HD video transmission. It’s recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and digital signage applications where the source and display are farther apart than conventional A/V cables allow.